The Burkle 0600-1003 PP Thread Adapter connects components with different container thread standards using S 71×6 (DIN71) internal threading on one side and G 2" internal threading on the other. It is designed for adapting pumps, barrel connections and other liquid-handling components to compatible drums and canisters.
This adapter is particularly useful when a container has a 71 mm external thread with a 6 mm pitch (S 71×6 / DIN71) and the equipment or barrel connection uses a G 2" external thread.
Important: Thread specifications must match exactly. The 0600-1003 has two internal threads: S 71×6 (DIN71) and G 2". The mating component must therefore have the corresponding external thread. Verify thread type, diameter and pitch before ordering.
| Connection | Thread | Thread Type |
|---|---|---|
| Container/component side | S 71×6 (DIN71) | Internal |
| Equipment/component side | G 2" | Internal |
The adapter provides a transition between the S 71×6 (DIN71) and G 2" thread standards. Because both threads on the adapter are internal, the components being connected must have the appropriate external threads.
Burkle specifically identifies this adapter for applications where a container has an S 71×6 (DIN71) external thread and a component such as a barrel screw connection has a G 2" external thread. This allows the two otherwise different thread standards to be connected through the adapter.
Correct thread identification is important when selecting a Burkle thread adapter. Container threads can vary considerably, particularly on plastic drums and canisters.
For an S 71×6 thread, the key dimensions are a 71 mm external diameter and 6 mm pitch. Burkle recommends measuring the thread rather than relying solely on the apparent size of the container opening.
Before ordering:
| Manufacturer | Burkle |
| SKU | 0600-1003 |
| Product type | Thread adapter |
| General material | PP (polypropylene) |
| Further material | FKM, FPM (fluorine rubber) |
| First connection | S 71×6 (DIN71), internal thread |
| Second connection | G 2", internal thread |
| Colour | Brown |
| Packaging unit | 1 piece |
The adapter is primarily constructed from polypropylene, with FKM/FPM fluorine rubber listed as a further material. Chemical compatibility should be evaluated for the specific liquid, concentration, temperature and operating conditions before use.
Do not assume compatibility solely from the PP construction. Burkle provides chemical-resistance information to assist with material selection.
The 0600-1003 has an S 71×6 (DIN71) internal thread and a G 2" internal thread.
S 71×6 (DIN71) is a container thread designation with a nominal 71 mm diameter and 6 mm thread pitch. For this adapter, the S 71×6 thread is internal.
G 2" refers to a G/BSP parallel pipe thread. The G 2" thread on the 0600-1003 is internal, so it is intended to mate with a compatible G 2" external thread.
The adapter is intended for compatible containers with an S 71×6 (DIN71) external thread. The connected equipment must also have a matching G 2" external thread. Always verify the actual thread dimensions before ordering.
It is more accurately described as a thread adapter. Its purpose is to connect two different thread standards: S 71×6 (DIN71) and G 2".
Thread standards can be difficult to identify from container dimensions alone. If you are unsure whether S 71×6 (DIN71), G 2" or another thread standard is required, contact Cambridge Environmental Products before ordering. We can help you identify the appropriate Burkle adapter for your application.
