The Burkle 0600-1007 PP Thread Adapter connects compatible BSF 2½" US barrel threads to G 2" connections. The adapter features a BSF 2½" (US barrel) external thread and a G 2" internal thread, providing a practical thread transition for compatible drums, pumps and liquid-handling equipment.
This adapter is designed for applications where pumps or other components need to be mounted on containers with different thread standards. The exact thread configuration should be verified before ordering.
Important: The 0600-1007 has a BSF 2½" (US barrel) external thread and a G 2" internal thread. The mating components must have the corresponding opposite threads. Verify the thread standard, diameter and pitch before ordering.
| Connection | Thread | Thread Type |
|---|---|---|
| Container side | BSF 2½" (US barrel) | External |
| Equipment/component side | G 2" | Internal |
The BSF 2½" (US barrel) connection is the defining feature of the 0600-1007. Burkle's thread information identifies BSF 2½" as an inch fine thread with an approximately 63.5 mm outer diameter and 4.2 mm pitch. The adapter uses this thread as an external connection.
The opposite side provides a G 2" internal thread for connection to a compatible G 2" external thread. This configuration allows equipment using the G 2" thread standard to be connected to a compatible US-barrel thread.
Burkle's thread adapter range is intended to facilitate connections between pumps, discharge equipment and containers using different thread standards. The 0600-1007 provides one specific transition: BSF 2½" (US barrel) external to G 2" internal.
For a compatible installation, the container-side connection must have an BSF 2½" internal thread, while the equipment or component being connected must have a G 2" external thread.
Thread compatibility should be confirmed using the actual thread standard, diameter, pitch and internal/external configuration. Burkle recommends matching these properties when selecting an adapter rather than relying only on the nominal size of a container opening.
Before ordering:
| Manufacturer | Burkle |
| SKU | 0600-1007 |
| Product type | Thread adapter |
| General material | PP (polypropylene) |
| First connection | BSF 2½" (US barrel), external thread |
| Second connection | G 2", internal thread |
| Colour | Silver |
| Packaging unit | 1 piece |
The 0600-1007 is constructed from polypropylene (PP). Chemical compatibility should be evaluated for the specific liquid, concentration, temperature and operating conditions before use.
Do not assume compatibility solely from the PP construction. Burkle provides chemical-resistance information to assist with material selection.
The 0600-1007 has a BSF 2½" (US barrel) external thread and a G 2" internal thread.
Burkle identifies BSF 2½" as an inch fine thread used for US-barrel connections. The 0600-1007 uses this thread as an external connection.
G 2" refers to a G/BSP parallel pipe thread. On the 0600-1007, the G 2" connection is an internal thread and is intended to mate with a compatible G 2" external thread.
The adapter is intended for compatible US-barrel connections using a BSF 2½" internal thread. The connected equipment must have a compatible G 2" external thread. Always verify the actual thread configuration before ordering.
Yes. More precisely, it converts between a BSF 2½" (US barrel) external thread and a G 2" internal thread.
Burkle offers multiple thread adapters for different drum, barrel, canister and equipment thread standards. If you are unsure whether a BSF 2½" US-barrel, G 2" or another thread configuration is required, contact Cambridge Environmental Products before ordering.
