Burkle Zone Samplers – Multi, Uno & All-Layer Bulk Solids Samplers

SKU: 5316-0055

Burkle Zone Samplers – Multi, Uno & All-Layer Bulk Solids Samplers

SKU: 5316-0055
Type
Length
Prix régulier $1,168.62 CAD
/
  • Paiements sécurisés
Frais d'expédition calculés lors du passage à la caisse.

Bürkle Zone Samplers – Multi, Uno & All-Layer Samplers for Bulk Solids, 316L Stainless Steel, 55–150 cm

Bürkle zone samplers are sampling lances for taking samples of powders, granules and other bulk solids at depth, from sacks, drums, tubs, big bags and silos. Push the closed lance into the material, turn the handle to open it, and material flows in at the exact depths you've chosen. Then close it and withdraw it with the sample held inside. Choosing the right zone sampler lets you check whether a material is uniform from top to bottom, take a sample from one specific depth, or collect a single sample through all layers.

Four types are available, each in 55, 85 and 150 cm lengths. Multi Samplers (316L/PTFE or all-316L) have separate chambers that keep a sample from each depth apart. The Uno Sampler takes one sample from one depth. The All-Layer Sampler collects material from every layer into one sample. Bürkle states the samplers are suitable for foodstuffs and autoclavable up to 121 °C. They're available in Canada from Cambridge Environmental Products with CAD pricing and Canadian purchasing support.

Ideal For

  • Food and ingredient QA/QC: sampling flour, sugar, starch, spices and powders from sacks and big bags
  • Pharmaceutical and chemical production: incoming raw material sampling and checking mixes for uniformity
  • Agriculture and feed: sampling grain, seeds, pellets and feed in bags, bins and silos
  • Plastics and industrial QA/QC: granules and pellets in drums, octabins and big bags
  • Research laboratories, universities and colleges

Why Choose Bürkle Zone Samplers?

Sample exactly where you need to

Bulk materials often separate in transport and storage, so the top of a bag may not match the bottom. Zone samplers take material from defined depths, so you can check uniformity layer by layer or build a sample that represents the whole container.

Three sampling methods

Multi Sampler: 3 or 5 separate chambers collect samples from several depths in one insertion and keep them apart for individual analysis. Uno Sampler: one closed chamber at the tip takes a targeted sample from a single depth. All-Layer Sampler: no chambers. Its 3 or 5 openings collect material from every layer into one sample.

Minimal gap, removable tip

Bürkle designs the lances with the smallest possible gap between the inner and outer tube, which reduces the risk of contamination and helps sampling accuracy. The tip is removable for thorough cleaning between samples.

Colour coding

The Multi and Uno Samplers have colour-coded caps, so when several samplers are in use you can assign each one to a material and avoid mix-ups.

Food-suitable and autoclavable

Bürkle states its zone samplers are suitable for use with foodstuffs, produced to DIN standards, and autoclavable up to 121 °C for 20 minutes.

Available Models

Choose the Type, then the Length. All lances are 25 mm in diameter.

Code Type Length Insertion Depth Sample Chambers / Volume
5316-0055 Multi Sampler – 316L/PTFE 55 cm 430 mm 3 chambers × 14 mL
5316-0085 Multi Sampler – 316L/PTFE 85 cm 710 mm 3 chambers × 17 mL
5316-0150 Multi Sampler – 316L/PTFE 150 cm 1,355 mm 5 chambers × 17 mL
5316-3055 Multi Sampler – 316L 55 cm 430 mm 3 chambers × 14 mL
5316-3085 Multi Sampler – 316L 85 cm 710 mm 3 chambers × 17 mL
5316-3150 Multi Sampler – 316L 150 cm 1,355 mm 5 chambers × 17 mL
5316-1055 Uno Sampler – 316L/PTFE 55 cm 430 mm 1 chamber × 17 mL
5316-1085 Uno Sampler – 316L/PTFE 85 cm 710 mm 1 chamber × 17 mL
5316-1150 Uno Sampler – 316L/PTFE 150 cm 1,355 mm 1 chamber × 17 mL
5316-2055 All-Layer Sampler – 316L 55 cm 430 mm 3 openings, 70 mL total
5316-2085 All-Layer Sampler – 316L 85 cm 710 mm 3 openings, 130 mL total
5316-2150 All-Layer Sampler – 316L 150 cm 1,355 mm 5 openings, 260 mL total

Specifications are from Bürkle and Bürkle distributor listings (Avantor, Fisher Scientific, Thomas Scientific).

Which Type and Length Should I Choose?

  • Multi Sampler: to check whether a material is uniform, or to analyze several depths separately in one go.
  • 316L/PTFE vs all-316L Multi Sampler: the 316L/PTFE version has PTFE sample chambers, so it's lighter and more economical. The all-stainless version is very robust, even with abrasive particles.
  • Uno Sampler: when you need one targeted sample from a specific depth, such as the bottom of a bag.
  • All-Layer Sampler: when you want one sample through the full depth of the container, for example for an average composition.
  • 55 cm: sacks and bags. 85 cm: drums, barrels and tubs. 150 cm: big bags, silos and tanks.

How to Use

  1. Turn the handle to close the sampler.
  2. Insert the closed lance into the bulk material to the required depth.
  3. Turn the handle to open the chambers or openings. Material flows in.
  4. Turn the handle to close the sampler again, then withdraw it.
  5. Open the sampler over a clean surface, sample paper or tray, and empty the sample. Keep each chamber's sample separate when using a Multi Sampler.

Steps are summarized from Bürkle's instructions. Bürkle also offers accessories such as sealing sleeves, sample paper, cleaning brushes and emptying devices. Contact Cambridge for options.

Common Applications

Application How It Helps
Incoming raw material inspection Samples sacks, drums and big bags at depth, not just at the surface.
Blend uniformity checks The Multi Sampler keeps each depth separate, so differences between layers show up.
Representative composite samples The All-Layer Sampler collects through the full depth in one insertion.
Targeted sampling The Uno Sampler takes a sample from one chosen depth, such as the bottom of a container.

Technical Specifications

Manufacturer Bürkle GmbH
Types Multi Sampler (316L/PTFE or 316L), Uno Sampler (316L/PTFE), All-Layer Sampler (316L)
Materials Stainless steel 1.4404 (AISI 316L); PTFE sample chambers on 316L/PTFE models; Bürkle also lists NBR among further materials
Lance diameter 25 mm
Lengths / insertion depth 55 cm / 430 mm; 85 cm / 710 mm; 150 cm / 1,355 mm
Tip Pointed, removable for cleaning
Colour coding Multi and Uno Samplers
Sterilization Autoclavable up to 121 °C for 20 min (per Bürkle)
Food contact Suitable for use with foodstuffs (per Bürkle)
Standard Produced according to DIN standards (per Bürkle)
Sold as Each

Specifications are from Bürkle product information and distributor listings.

Selection & Handling Notes

  • Close before inserting. Always close the sampler before inserting and withdrawing it, so material only enters at the target depth.
  • Particle size: the 25 mm lances suit fine powders through to granules. For very coarse material or larger quantities, ask Cambridge about Bürkle's larger-diameter samplers.
  • Prevent cross-contamination. Remove the tip and clean thoroughly between materials. Autoclave at up to 121 °C for 20 minutes where required.
  • Check chemical resistance of 316L, PTFE and NBR against the material you're sampling.
  • Don't use the lance as a lever or force it through compacted material. The tube can bend.
  • Hazardous materials: follow the material's Safety Data Sheet and wear suitable protective equipment, including dust protection for fine powders.

Product Documents

Need operating instructions, a material certificate or accessory information? Contact Cambridge and we'll request it from Bürkle.

Canadian Purchasing Support

Cambridge Environmental Products is a Canadian-owned laboratory supply distributor based in Ontario and has served Canadian labs since 1993. We supply Bürkle sampling equipment with CAD pricing and shipping across Canada. We work with food and ingredient manufacturers, pharmaceutical and chemical producers, agriculture and feed labs, plastics and industrial QA/QC, and universities and colleges, and can help with quotes and choosing the right sampler. Browse our lab supplies collection for more.

Frequently Asked Questions

What is a zone sampler?

A sampling lance for bulk solids. It's inserted closed, opened at depth to collect material, then closed and withdrawn with the sample inside.

What's the difference between the Multi, Uno and All-Layer Samplers?

The Multi Sampler has 3 or 5 separate chambers for samples from several depths, kept apart. The Uno Sampler has one chamber for one depth. The All-Layer Sampler has no chambers and collects one sample through all layers.

Should I choose 316L/PTFE or all-316L?

316L/PTFE is lighter and more economical, thanks to its PTFE sample chambers. All-316L is the most robust option, including for abrasive materials.

Which length do I need?

55 cm for sacks, 85 cm for drums, barrels and tubs, and 150 cm for big bags, silos and tanks.

Can zone samplers be autoclaved?

Yes. Bürkle states they're autoclavable up to 121 °C for 20 minutes.

Are they suitable for food?

Bürkle states its zone samplers are suitable for use with foodstuffs.

What materials can they sample?

Bulk solids from fine powders to granules and grains. For very coarse material, ask about Bürkle's larger samplers.

Are Bürkle zone samplers available in Canada?

Yes. Cambridge Environmental Products supplies Bürkle zone samplers across Canada with CAD pricing.

Need Help Choosing a Zone Sampler?

Tell us:

  • The material you sample (powder, granules, grain) and its particle size
  • The container (sack, drum, big bag, silo) and its depth
  • Whether you need separate samples per depth, one depth, or one composite sample
  • Whether the sampler must be autoclaved or used with food

We'll recommend the right type and length.

Contact Cambridge for Product Support
Vu récemment