Burkle Liquid-Sampler – 316L Stainless Steel, 50 & 100 mL

SKU: 5326-0001

Burkle Liquid-Sampler – 316L Stainless Steel, 50 & 100 mL

SKU: 5326-0001
Valve
Volume
Prix régulier $584.85 CAD
/
  • Paiements sécurisés
Frais d'expédition calculés lors du passage à la caisse.

Bürkle Liquid-Sampler – 316L Stainless Steel, 50 mL & 100 mL

The Bürkle Liquid-Sampler is a stainless steel dip sampler for taking liquid samples at a chosen depth from tanks, drums, vats and open containers. Lower it into the liquid and it fills. Lift it out, and it holds the sample until you release it into your sample bottle through the built-in discharge funnel. Everything is done with one hand, and the sample goes straight into the bottle with less spilling and less contact with the liquid.

The sampler is made entirely of AISI 316L stainless steel (1.4404). It can be steam sterilized at 121 °C, which suits food, beverage and pharmaceutical sampling where equipment has to be cleaned and sterilized between uses. It comes in two valve styles, opened with the thumb or opened by placing it onto the bottle, each in 50 mL and 100 mL. Bürkle Liquid-Samplers are available in Canada from Cambridge Environmental Products with CAD pricing and Canadian purchasing support.

Ideal For

  • Food and beverage QA/QC: sampling juices, syrups, dairy, wine and beer from tanks and vats
  • Pharmaceutical and cosmetic production: sterilizable stainless steel sampling equipment
  • Chemical and industrial QA/QC: sampling from drums, IBCs and process tanks
  • Wastewater and environmental labs: depth sampling from open basins and containers (liquids without solids)
  • Research laboratories, universities and colleges

Why Choose the Bürkle Liquid-Sampler?

One-handed sampling at depth

The sampler fills when lowered into the liquid and holds the sample as you lift it out. Your other hand stays free to hold the sample bottle or steady yourself at the tank.

Clean transfer into the sample bottle

A discharge funnel guides the sample into the bottle. That reduces spills and drips on the outside of the bottle, which matters with hazardous liquids and when samples must not be contaminated.

316L stainless steel, steam sterilizable

The whole sampler is AISI 316L stainless steel, which is corrosion resistant and easy to clean. Bürkle states it can be steam sterilized up to 121 °C, so it can be reused between batches under your validated cleaning procedure.

Two valve styles

The thumb valve lets you open the valve with your thumb and pour wherever you choose. The place-onto-bottle valve opens only when the sampler is set onto the sample container, so the sample can't be released by accident while you're carrying it.

Maintenance-free

There are no seals, pumps or moving parts to service. Clean it after use and it's ready for the next sample.

Available Models

Choose the Valve style, then the Volume. All four combinations are available.

Code Valve Volume Total Length Outer Ø Max. Immersion Depth
5326-0001 Open with thumb 50 mL 460 mm 32 mm 380 mm
5326-0002 Open with thumb 100 mL 540 mm 32 mm —
5326-0003 Place onto bottle 50 mL 455 mm 32 mm 425 mm
5326-0004 Place onto bottle 100 mL 535 mm 32 mm —

Dimensions are from Bürkle and Bürkle distributor listings. Bürkle doesn't publish the maximum immersion depth for the 100 mL models; contact Cambridge if you need it.

Which Model Should I Choose?

  • Open with thumb (5326-0001, 5326-0002): you control exactly when and where the sample is released. A good general choice for pouring into bottles, beakers or other containers.
  • Place onto bottle (5326-0003, 5326-0004): the valve opens only when you set the sampler onto the bottle, so it can't empty by accident while you carry it. Better for hazardous liquids, or when you always sample straight into a bottle.
  • 50 mL vs 100 mL: choose 100 mL when your analysis needs more sample or you want to fill a bottle in fewer dips.

How to Use

  1. Lower the sampler into the liquid to the required depth. It fills with sample.
  2. Lift the sampler out of the liquid, keeping it upright.
  3. Thumb valve: hold it over the sample container and open the valve with your thumb. Place-onto-bottle valve: set it onto the sample container, and the valve opens to empty the sample.
  4. Clean the sampler after use according to your validated cleaning procedure.

Steps are summarized from the Bürkle directions for use. Read the full instructions before use.

Common Applications

Application How It Helps
Food and beverage tanks Steam-sterilizable stainless steel for hygienic sampling between batches.
Drums and IBCs Takes a sample from below the surface without pouring from the container.
Pharmaceutical and cosmetic production 316L stainless steel that can be cleaned and sterilized under validated procedures.
Open basins and vats Depth sampling of liquids without solids, released cleanly into a sample bottle.

Technical Specifications

Manufacturer Bürkle GmbH
Material Stainless steel 1.4404 (AISI 316L); Bürkle's instructions also list 1.4571 (AISI 316Ti)
Volumes 50 mL or 100 mL
Outer diameter 32 mm
Total length 455–540 mm, depending on model (see table)
Valve Open with thumb (5326-0001/-0002) or place onto bottle (5326-0003/-0004)
Discharge Discharge funnel for filling sample bottles
Operating temperature 0–60 °C
Sterilization Steam sterilizable up to 121 °C
Suitable media Liquids and low-viscosity media without solid components
Maintenance Maintenance-free
Sold as Each

Specifications are from the Bürkle directions for use and product pages.

Selection & Handling Notes

  • Liquids without solids. Bürkle's instructions limit use to liquids and low-viscosity media without solid components. For sludges, powders or liquids with particles, use a different sampler.
  • Operating temperature 0–60 °C. Don't sample hotter liquids. Steam sterilization up to 121 °C is for cleaning only.
  • Sampling only. The sampler isn't for storing samples. Transfer them into a suitable bottle.
  • Don't tip a filled sampler, and don't use it as a lever or apply force. The tube can deform.
  • Check chemical resistance. Confirm 316L stainless steel is compatible with the liquid. Bürkle provides a chemical resistance list.
  • Hazardous liquids: follow the liquid's Safety Data Sheet and wear suitable protective equipment.
  • Clean before first use according to your validated cleaning procedure.

Product Documents

Need a material certificate or more documentation? Contact Cambridge and we'll request it from Bürkle.

Canadian Purchasing Support

Cambridge Environmental Products is a Canadian-owned laboratory supply distributor based in Ontario and has served Canadian labs since 1993. We supply Bürkle sampling equipment with CAD pricing and shipping across Canada. We work with food and beverage producers, breweries and wineries, chemical and industrial QA/QC, wastewater and environmental labs, and universities and colleges, and can help with quotes and choosing the right sampler. Browse our lab supplies collection for more.

Frequently Asked Questions

What is the Bürkle Liquid-Sampler used for?

Taking liquid samples at a chosen depth from tanks, drums, vats and open containers, and releasing them cleanly into a sample bottle.

What's the difference between the thumb valve and place-onto-bottle versions?

The thumb version opens when you press the valve with your thumb. The place-onto-bottle version opens only when you set it onto the sample container, so it can't empty by accident.

What is it made of?

AISI 316L stainless steel (1.4404). Bürkle's instructions also list 1.4571 (AISI 316Ti).

Can it be autoclaved?

Yes. Bürkle states it can be steam sterilized up to 121 °C. The operating temperature for sampling is 0–60 °C.

Can I sample viscous liquids or liquids with solids?

Bürkle's instructions specify liquids and low-viscosity media without solid components. For thicker media or samples with particles, contact Cambridge about other samplers.

How deep can it sample?

The 50 mL models reach a maximum immersion depth of 380 mm (thumb) or 425 mm (bottle). The total lengths are 455 to 540 mm.

Is the Liquid-Sampler available in Canada?

Yes. Cambridge Environmental Products supplies Bürkle Liquid-Samplers across Canada with CAD pricing.

Need Help Choosing a Liquid Sampler?

Tell us:

  • The liquid you're sampling, and whether it contains solids
  • The container type and the depth you need to reach
  • The sample volume your analysis needs
  • Whether the sampler must be sterilized between uses

We'll recommend the right sampler.

Contact Cambridge for Product Support
Vu récemment