ATP Testing & Sanitation Verification
30 products
Shop by category
Showing all 30 products
Recently viewed
Buying guide & FAQCompare ATP testing systems and get quick answers
All four meters read a swab in seconds and report results in RLU (relative light units). The real differences are how results are recorded and reported, which tests each one reads, and the ongoing cost of swabs.
| Feature | Hygiena EnSURE TouchHygiena | Hygiena SystemSURE PlusHygiena | Kikkoman Lumitester SmartKikkoman | PCE-ATP 1PCE Instruments |
|---|---|---|---|---|
| Best for | Multi-line or multi-site programs that want cloud reporting and one meter for many test types | Established Hygiena programs with simpler, PC-based record keeping | App-based tracking, and residues that ATP-only tests can miss | Standalone spot checks on a tighter budget |
| Time to result | 10 seconds | 15 seconds (UltraSnap / AquaSnap) | 10 seconds | 10 seconds |
| What it detects | ATP | ATP | ATP + ADP + AMP (A3) | ATP |
| Tests it reads | UltraSnap, SuperSnap, AquaSnap, plus MicroSnap and ZymoSnap | UltraSnap, AquaSnap Total & Free | LuciPac A3 Surface and A3 Water | PCE test tubes for water and surfaces |
| Data & software | SureTrend cloud software over Wi-Fi (USB also) | SureTrend software over USB; 5,000 test locations | Lumitester Smart app with cloud access | PC software over USB; stores 10,000 results; Bluetooth printer |
| Screen & power | 5" touchscreen | Backlit screen; 2 × AA batteries | 2 × AA batteries | 3.5" LCD; rechargeable, about 10 hours per charge |
| Calibration check | CalCheck (sold separately) | CalCheck (sold separately) | Lumitester Calibration Kit | Automatic self-check before each use |
Before you choose: swabs aren't interchangeable between brands. Each meter only reads its own manufacturer's tests, so the swabs you'll buy every month are decided by the meter you pick. Estimate your monthly test volume and factor in ongoing swab costs, not just the meter.
What is ATP testing and what does RLU mean?
ATP (adenosine triphosphate) is found in all living cells, including food residue and microorganisms. An ATP test swabs a surface or water sample, and a luminometer measures the light the reaction gives off in relative light units (RLU). Higher RLU means more organic residue was left behind after cleaning.
Can I use one brand's swabs in another brand's meter?
No. Each luminometer is designed to read its own manufacturer's tests: Hygiena meters read Hygiena tests, the Kikkoman Lumitester reads LuciPac swabs, and the PCE-ATP 1 reads PCE test tubes. Choose the meter and the ongoing swab supply together.
What is the difference between ATP-only and A3 testing?
Standard ATP tests detect ATP only. Kikkoman's A3 system also detects ADP and AMP, which form as ATP breaks down, for example in heat-treated, fermented or processed foods. That can reveal residue an ATP-only test may read as low.
Which test should I use: surface or water?
Surface tests check food-contact surfaces and equipment after cleaning. Water tests check rinse water, including CIP (clean-in-place) final rinses, to confirm lines and tanks were cleaned properly. Many facilities use both.
How do I set pass and fail limits?
Each meter comes with suggested limits, but the best practice is to test your own surfaces right after a thorough clean, record the typical readings for each location, and set limits from that baseline. Review them as your cleaning program matures.
Does ATP testing detect bacteria or allergens?
Not specifically. ATP testing measures overall organic residue, which tells you whether cleaning worked. To detect specific organisms such as Listeria or Salmonella, use rapid microbiology tests. For protein or allergen residue, use a protein residue test.
How do I know my luminometer is reading accurately?
Use the manufacturer's calibration verification device: CalCheck for Hygiena meters, or the Lumitester Calibration Kit for Kikkoman. The PCE-ATP 1 runs its own self-check before each use. Follow the manufacturer's recommended schedule and keep a record of each check for audits.
Can Cambridge help me choose a system?
Yes. We help Canadian facilities compare meters, swabs and accessories based on what you're testing, how many tests you run each month, your reporting requirements and your ongoing consumable budget. Call 1-800-535-3751 or contact us for a quote.
Need help finding the right equipment or supplies?
We can help you choose the right balance for your application!
Utilizing 30 years of scientific experience, we can assist in selecting the ideal combination of features and cost-effectiveness for precise weighing needs. Reach out to us!