Bürkle Sampling Drill for Stalk Material – Hay, Silage & Straw, Ø 25 or 45 mm
The Bürkle sampling drill for stalk material is a core drill for hay, silage, straw, herbs, shrubs and other stalky plant material, where ordinary samplers quickly get tangled. The special geometry of the drill tip cuts quickly and cleanly through stalks, so you can take samples from a silo or bale without effort.
It runs in a hand-held drill or a powerful cordless screwdriver with speed control, and can be used vertically (sampling from above) or horizontally (sampling from the side). An ejector pushes the sample out of the tube. Choose a Ø 25 or 45 mm drill in 200 or 400 mm lengths. It's available in Canada from Cambridge Environmental Products with CAD pricing.
Ideal For
- Hay and straw bales
- Silage in bunkers, silos and wrapped bales
- Forage and feed quality testing
- Herbs, shrubs and plant material
Why Choose the Stalk Material Sampling Drill?
Doesn't tangle
The drill tip geometry cuts stalky material rather than winding it up.
Powered sampling
Running it in a drill makes sampling quick and easy, even in dense bales.
Vertical or horizontal
Sample from the top of a bale or silo face, or from the side.
Ejector included
Push the sample cleanly out of the tube.
Available Models
Choose Diameter, then Length, in the selector. Drill or cordless screwdriver not included.
| Code | Ø | Length | Volume |
|---|---|---|---|
| 5337-2020 | 25 mm | 200 mm | approx. 70 mL |
| 5337-2040 | 25 mm | 400 mm | — |
| 5337-4020 | 45 mm | 200 mm | — |
| 5337-4040 | 45 mm | 400 mm | — |
Specifications are from Bürkle and Bürkle distributor listings.
Which Model Should I Choose?
- Smaller samples and lighter drills: Ø 25 mm.
- Larger samples or coarse material: Ø 45 mm.
- Surface layer or small bales: 200 mm.
- Deeper into large bales and silage: 400 mm.
How to Use
- Fit the sampling drill into a hand-held drill with speed control and check it is seated firmly.
- Drill into the bale or silage, vertically or horizontally.
- Withdraw the drill.
- Remove the sampling tube from the drill.
- Empty the sample into a container using the ejector.
Based on Bürkle's directions for use.
Technical Specifications
| Manufacturer | Bürkle GmbH |
| Material | Stainless steel 1.4404 / 1.4034 |
| Diameters | 25 mm, 45 mm |
| Lengths | 200 mm, 400 mm |
| Drive | Hand-held drill or cordless screwdriver with speed control (not included) |
| Orientation | Vertical or horizontal |
| Included | Sampling drill and ejector |
Specifications are from Bürkle and Bürkle distributor listings.
Selection & Handling Notes
- Check the drill is firmly seated before use. Bürkle warns of injury from ejected parts.
- Use speed control and keep hands clear of the rotating drill.
- Wear eye protection when drilling dry material.
Canadian Purchasing Support
Cambridge Environmental Products is a Canadian-owned laboratory supply distributor based in Ontario and has served Canadian labs since 1993. We supply Bürkle sampling equipment with CAD pricing and shipping across Canada. We work with farms, feed mills, forage labs, agricultural consultants and universities, and can help with quotes and choosing the right sampler. Browse our lab supplies collection for more.
Frequently Asked Questions
What is the stalk drill for?
Sampling hay, silage, straw, herbs, shrubs and other stalky plant material where other samplers tangle.
Do I need a drill?
Yes. It runs in a hand-held drill or powerful cordless screwdriver with speed control, not included.
Can I sample from the side?
Yes. It works vertically and horizontally.
How do I get the sample out?
Use the ejector to push the sample out of the tube.
Is the Bürkle Stalk Material Sampling Drill available in Canada?
Yes. Cambridge Environmental Products supplies it across Canada with CAD pricing.
Need Help Choosing a Sampler?
Tell us:
- What material you're sampling
- Bale or silo size
- The sample size you need
We'll recommend the right model.
Contact Cambridge for Product Support