Hygiena Calibration Control Kit
Calibration Control Kit - Instrument Verification Rods
Eliminate the need for manufacturer calibration checks, saving you hundreds of dollars per year. For use with SystemSURE Plus and EnSURE Luminometers. Verify instrument calibration in-house, and prove to auditors that your monitoring system is working properly.
Each kit is comprised of a Positive rod and a Negative rod. The Positive Rod emits a very low level of low-energy radiation in a plastic scintillation matrix. This matrix is configured to give constant light output, within 10% of its original value, at sufficiently high level for up to five years. The Negative Rod produces low-light or zero (0) RLU background and is used to check that background light is not entering the instrument or ensure that the light detector is calibrating correctly.
Hygiena SystemSURE Plus and EnSURE luminometers are designed to self-calibrate at startup, but it is recommended to verify calibration with the Calibration Control Kit. Incorporating the Calibration Control Kit into overall Quality Control program will confirm that the instrument is within specifications and operating correctly.Satisfies GMP and HACCP/SSOP requirements stipulating all measurement systems in use to be properly calibrated and operating within manufacturers' specifications.
The rods should be measured in the luminometer on a regular basis to keep a record of calibration control
Shelf life: 5 years